ECOFLOW Kit Energy 10 kWh
10 kWh ECOFLOW Energy Kit - A37234
Designer and manufacturer of lithium batteries and solar generators, ECOFLOW has extensive expertise in energy production and storage systems.
Install a system for storing, producing and distributing electricity in a converted van or camper van, simple to implement and efficient. This is what the manufacturer ECOFLOW promises you with the 10 kWh Energy kit!
The proposed storage power of 10420 Wh in 48 V is equivalent to 12 V lithium batteries of approximately 860 Ah. This way, you can supply large energy needs. Ideal for operating a refrigerator, hair dryer, induction hob, microwave & even washing machine!
The ECOFLOW Lithium battery, supplied with the Energy Kit, is equipped with LiFepo4 technology , ensuring a particularly high number of cycles: 3500 discharge cycles at 80% before the battery loses capacity. Equipped with a heating system , the battery can be used even in negative temperatures, down to -20°C. The heating system will automatically activate below 0°C.
A true all-in-one power unit , the ECOFLOW Power Hub centralizes charging , energy storage and grid distribution devices. You can easily connect ECOFLOW lithium batteries, solar panels , van alternator, generator, control panel and electrical distribution panel.
The connection is made using a dedicated ECOFLOW cable, so you can be sure not to make any mistakes in the connections. Please note that for some elements, the Power Hub will only be compatible with ECOFLOW devices, for example the brand's 48V Lithium batteries. We'll detail all of this below!
The Power Hub is therefore intended to centralize a maximum of elements, whether they are charging devices or 230 V converters! You will therefore be able to use the following functionalities:
- MPPT regulators : 2 MPPT regulators are integrated into the Power Hub. They each accept 30 A input & can therefore accept a 1600 W solar park, or 3200 W in total. The Alternator input can also accept a solar panel , & so you can consider installing a solar park up to 4800 W!
- Combined DC/DC charger booster : One input is dedicated to recharging the alternator or solar panel, accepting 1000 W of charge! You can connect the vehicle's alternator OR a solar park. In order to optimize the charge as much as possible, it is advisable to couple a reinforced alternator of at least 150 A.
- 230 V charger : Recharge the batteries via the mains, when you have access to 230 V. Equipped with the X-Stream fast charging function, you can charge the ECOFLOW lithium battery bank with up to 3000 W of power (provided the terminal is sufficiently powerful).
- Generator Input : An input is provided for the connection of a 3rd battery or ECOFLOW Smart Generator generator! The group automatically takes over from solar production if your battery bank drops too low, 1800 W of charge. It is possible to install generators of a different brand than ECOFLOW
- 230 V converter : 3600 W output for the AC network, the X-boost mode allows to go up to 5000 W. The peak current can reach 7200 W. In case of connection to the 230 V network, a By-pass mode allows to supply the 230 V AC outputs without going through the converter & therefore there is no more power limit.
- DC/DC step-down : The ECOFLOW Lithium batteries to be connected to the Power Hub are 48 V. To power the 12 or 24 V DC circuits of the converted van, the voltage must therefore be lowered. A 48 - 12/24 V step-down is therefore provided for this purpose.
The Power Hub allows you to create 2 separate electrical networks in your van: AC 230 V & DC 12/24 V. This will have the advantage of ensuring the power supply of certain specific devices in 12/24 V (such as the water pump or diesel heating) & of being able to operate all the other devices in 230 V (refrigerator, household appliances, water heater, etc.).
OEM Numbers
A37232
Related Parts
KAER0006
Generic
Generic
Specifications
What are the advantages of the Energy ECOFLOW kit compared to a traditional electrical installation?
Technical characteristics of the ECOFLOW 5 kWh LFP battery:
- Lithium Fer Phosphate technology
- Nominal capacity: 5210 Wh (100Ah)
- Lifespan: 3000 Cycle at 80% capacity
- Nominal voltage: 51.2 V
- Charge cut-off voltage: 57.6 V
- Discharge cut-off voltage: 40 V
- Max continuous charging current: 80 A
- Continuous discharge current: 100 A
- Net weight: Approx. 40.6 kg
- Dimensions : 500x 260 x 300 mm
- Protection IP : IP54
Technical characteristics of the ECOFLOW Power Hub:
- Pure Sine AC Output: 3600 W continuous / 7200 W peak 100 ms / 5200 WX Boost
- Sortie CC : 13.6 V / 70 A / 1000 W Max - 26.4V / 60 A / 1600 W Max
- AC input (230 V load): Power 3000 W / Current 15 A
- AC input voltage: 220 - 240 V, 50 - 60 Hz
- PV input 2/3: 15 - 60 V - 30 A - Max power 1600 W
- Alternator/PV Input 1: 13-60 V 60 A - 1000 W
- 15-60 V 30 A - 1600 W
- Battery input 1/2/3: 40 - 60 V / Total 100 A / Up to 3 X 5 kWh or 2 kWh Lifepo4 (do not connect battery 2 & 5 kWh simultaneously)
- Operating & storage temperature: -25°C to +60°C
- Built-in Wi-Fi
- Built-in Bluetooth
- Weight: 14 kg
- Dimensions (L x l x h) : 48 x 14 x 30 cm
Technical characteristics of the ECOFLOW Smart Panel control panel :
- Output 230 V: x6 / 10 A maximum
- 12/24 V output: x12 / 20 A maximum / 6 controllable & 6 non-controllable outputs
- 230 V input: 30 A max
- 12/24 V input: 70 A max
- Operating temperature: -25° to +60°C
- Storage temperature: -25°C to +60°C
- Dimensions 354 x 210 x 98 mm
- Weight: 2.6 kg
Technical characteristics of the ECOFLOW Power console control panel:
- Screen size: 154.2 mm x 85.9 mm
- Resolution: 1024 x 600
- Touch control
- RJ 45 connection
- External dimensions: 204.5 x 113.3 x 22.3 mm
- Operating temperature: -20°C to +50°C
Product Classification
ENER
Category Data
Spare Part









